Пропустить переходы по меню

В настоящее время данная страница на вашем языке отсутствует. Вы можете просмотреть результат машинного перевода, полученный с использованием опции Google Translate. Мы не несем ответственности за предоставление этой услуги, и результаты перевода нами не проверяются.
Если вам требуется помощь, просим вас связаться с нами.

Optical encoders compliance certificates

Select the required compliance data from the list and table below:

Declarations of Conformity

CE marking and UKCA marking require that the relevant Declarations of Conformity are prepared for each product. Please find the declarations for each encoder system in the table below. If you need a DoC for a specific product that is not shown, then please contact EPD.Compliance@Renishaw.com.

Products

EU

UK

ADTi-100

EU2018-029

ADTa-100

EU2018-014

ATOM™ diagnostic equipmentECD2016-23
ATOM cabled readheadsECD2016-21
ATOM FPC readheadsECD2016-22
ATOM DX™ readheadsEUD2019-60
B2B ACiEU2017-167
EVOLUTE™ readheadsECD2016-27
FORTiS™ encoder systems

EUD2021-00815

UKD2021-00815

FORTiS Functional Safety

EUD2021-00819


UKD2021-00819


RESOLUTE™ and Siemens DRIVE-CLiQ®EUD2021-00813UKD2021-00813
RESOLUTE Functional Safety and Siemens DRIVE-CLiQEUD2020-00532
RESOLUTE Functional Safety with BiSS® C SafetyEUD2020-00506
QUANTiC™

EU2018-005

EUD2020-27

RGH20ECD2016-28
RGH22ECD2016-29
RGH24ECD2016-30
RGH25ECD2016-31
RGH34ECD2016-34
RGH40ECD2016-35
RGH41ECD2016-36
RGH45ECD2016-37
TONiC™ readheads, interfaces, accessoriesECD2016-41
TONiC™ Functional SafetyEUD2020-00533
VIONiC™ readheads

EUD2021-00848

UKD2021-00848

RoHS

All Renishaw optical encoder systems and associated parts are RoHS compliant in relation to Directive 2011/65/EU, including the amendment to Annex II, 2015/863/EU (31 March 2015), as shown by the CE certificates here. If you need a RoHS certificate for a specific product that is not shown, then please contact EPD.Compliance@Renishaw.com.

WEEE

Guidance regarding end of life disposal is included in product installation guides.

Material safety data sheet

Please refer to the RGG-2 2 part adhesive material safety data sheets.

ISO 9001

Renishaw's quality assurance system and procedures are audited for compliance with ISO 9001, the internationally recognised standard for quality management systems. Renishaw's certificate of registration to EN ISO 9001 is issued by BSI Management Systems and carries the UKAS accreditation logo. This is your assurance that not only does Renishaw operate procedures to the ISO standard, but the company has been audited and certified by a competent, UKAS accredited, organisation. UKAS accreditation is recognised in many countries worldwide by their relevant national body. If you need more information, please contact EPD.Compliance@Renishaw.com.

Conflict Minerals, REACH, Green Procurement Standard and other regulations or standards

Information relating to the above and other matters of compliance may be found by using the Public Supplier Information page. In the case that your query is not resolved, then please contact EPD.Compliance@renishaw.com.


Functional safety

TONiC FS

The TONiC FS encoder system has been certified by Renishaw plc (itself certified to perform this undertaking by CSA Sira), reference certificate number FSC001-01, against BS EN ISO 13849-1 as being suitable for use in applications requiring up to performance level d (PLd) and against BS EN IEC 61508 / BS EN IEC 61800-5-2.

RESOLUTE FS Siemens DRIVE-CLiQ

The RESOLUTE FS Siemens DRIVE-CliQ encoder system has been certified by CSA Sira, reference certificate number FSP16008/00, against BS EN ISO 13849-1 as being suitable for use in applications requiring up to performance level d (PLd) and against BS EN IEC 61508 / BS EN IEC 61800-5-2.

RESOLUTE FS BiSS® Safety

The RESOLUTE FS with BiSS Safety encoder system has been certified, reference certificate number FSC002-01, as being suitable for use in a Category 3 performance level d (PLd) application in compliance with ISO 13849-1 and in a safety integrity level 2 (SIL2) application in compliance with IEC 61508-1 and IEC 61800-5-2.

FORTiS FS

The FORTiS FS encoder system has been certified, reference certificate number FSC003-01, as being suitable for use in a Category 3 performance level d (PLd) application in compliance with ISO 13849-1 and in a safety integrity level 2 (SIL2) application in compliance with IEC 61508-1 and IEC 61800-5-2.

For information about the functional safety performance of other encoder systems, please contact EPD.Compliance@Renishaw.com.